Pressing "Light button" and "Power" one for 3-5 seconds the receiber switch and FM is extended 64-108 MHz. Repeating operation back to "Wide FM" mode 76-108 MHz.
https://www.youtube.com/watch?v=fOntRwy8J7Q
Now I can get signals from OIRT band 64-76 MHz.
The radio is Sangean ATS 909X and 1.29 software version.
New settings:
FM 64-108 MHz
LW 100-519 kHz
MW 520-1710 KHz
SW 1711-29999 KHz
I'm not sure if this works on all 909X. My Sangean ATS 909X version is 1.29.
How to receive OIRT band FM with Sangean ATS 909X
-
manueljbaeza
- Posts: 33
- Joined: 08 Oct 2014 22:27
- Location: Baeza, Spain
- Contact:
How to receive OIRT band FM with Sangean ATS 909X
Home: RTL 2832u dongle EzTV665 + 4 elements 6.5 dB gain ant.
Mobile: Sony Mex-bt3900U
Portable: Tecsun PL360, Sangean ATS 909X, RTL2832u dongle EzTV665 + telephone
Mobile: Sony Mex-bt3900U
Portable: Tecsun PL360, Sangean ATS 909X, RTL2832u dongle EzTV665 + telephone
-
Tim Bucknall
- Posts: 1926
- Joined: 01 Oct 2014 14:55
- Location: Congleton, often in the Peak District
- Contact:
Re: How to receive OIRT band FM with Sangean ATS 909X
good info thanks
Home:Burkhardt Reuter RDR54D1 SDR V.415,
+ CLP 5130 Log P ant
Mobile: Comm Radio CR-1 + Sharman Skyscan ant, Pira P275
+ CLP 5130 Log P ant
Mobile: Comm Radio CR-1 + Sharman Skyscan ant, Pira P275
-
dxradiofan
- Posts: 138
- Joined: 10 Mar 2015 22:39
Re: How to receive OIRT band FM with Sangean ATS 909X
Heck and I had to go to Moscow for my OIRT version 